Hello everyone!
The corona wires have become dirty. Clean the corona wires in the drum unit. …
The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly. …
If the issue still continues, the drum unit is at the end of its life.
Thanks
Brother Printer Drum Error | Brother Printer In Error State
Hello everyone!
An issue most commonly associated with driver or printer cable problems, turning the printer off and on should see this error message disappear. ... Try resetting the printer initially and reinstall the toner cartridge if the problem persists. If these fail, it could be a hardware issue.
Thanks
For more go to:-
Printer In Error State | Printer Error State
Hello everyone!
How do I get my printer out of an error state?
Make ports settings changes. Press the Windows logo key + R on your keyboard> type devmgmt.msc and hit Enter to open the Device Manager. ...
Make sure that your printer is Online. ...
Reinstall the printer driver. ...
Set the Print Spooler service to automatic. ...
Update Windows.
Thanks
For more go to: -
HP Printer In Error State | Printer In Error State
Hello everyone!
Troubleshooting offline printer problems
Check to make sure the printer is turned on and connected to the same Wi-Fi network as your device. ...
Run a printer power cycle. ...
Set your printer as the default printer. ...
Clear the print queue. ...
Reset the service that manages the printing queue. ...
Remove and re-add your printer to your device. ...
Restart your PC.
Thanks
For more go to:-
Epson Printer Not Printing| Epson Printer in Error State
Hello everyone!
1. Perform a power cycle. At first, turn off your Canon printer.
2. Check your ink cartridge. First of all, turn off your printer and make sure all the ink cartridges are full.
3. Rule out a potentially bad network connection.
4. Remove paper jam.
5. Update drivers.
6. Use Windows Troubleshooter.
Thanks
B200 Error | Canon B200 Error