The Introduction to Rod Mill: Ore Milling Equipment are extremely related to ball mills, besides they use long rods for grinding media. The rods grind the ore by tumbling within the mill, similar on the grinding balls in a ball mill. To prevent the ailments primary to rod demand tangling, the size to diameter ratio is preserved at one.four to one.six. The recognized feeding dimension of rod mills is about fifty mm (two in.) and also the last merchandise dimension is about 3000 to 270 mm (–4 to –35 mesh). Grinding motion is by line contact concerning the rods extending the length in the mill. Programs of Rod Grinder: The rod grinder(also referred to as pin crusher), a tumbling mill characterized via the use of rods as grinding media, is utilized for grinding ores, coal/coke, and various elements for each wet and dry programs. The rod grinder performs most effective when making solutions owning a best size of four mesh to 16 mesh operating in open up circuit, or as fine as 35 mesh operating in shut circuit by using a display or other sizing device. The rod mill accepts feed ore as coarse as 1 1/2″ major size despite the fact that better performance is acquired by restricting ore feed measurement to 3/4″. Supplies way too damp for fine crushing and dry screening may very well be soaked floor in a rod mill. Follow has shown the ability of the rod mill to dry grind moist products that should pack or plug other grinding gear and scrap decline is reduced by accurate collection of liners for your distinct grinding duty. Supplemental advantage final results from usage of a backing material, these kinds of as rubber in between the liners as well as mill shell. Rod Grinding Mill: Rod grinding mill by Henan adopts managed engineering for the materials, which makes goods granularity more even, output higher, and rate sensible, so it is actually widely used in chemical industry, metallurgy, glass. The shoppers can decide on acceptable rod grinding machine basing around the real problem.