Different environments also require different types of cabling systems to ensure the fiber stays in good condition. Depending on where you are installing the cable, there are two basic types of fiber cabling systems that can be used:
o Inside plant - Inside plant fiber cat6 cable systems are designed for use inside a building where they generally have no contact with environmental variables. In a typical fiber inside plant cable system, individually coated fibers are positioned around a dielectric strength member core, and then surrounded by a subunit jacket. Aramid yarn(Kevlar) surrounds the individual subunits within the cable, reinforcing tensile strength. Some inside plant fiber cabling systems have an outer strength member as well, meant to provide protection to the entire cable. For inside plant installation, fiber ribbon-cable systems are also frequently used. Ribbon cables have a flat ribbon-like configuration that allows installers to conserve conduit space as they install more cables in a particular conduit.
o Outside plant - When installing fiber optic cable either outside or underground, an outside plant fiber optic 1/0 welding cabling system is used. Outside plant fiber cabling systems are composed of individual gel-filled subunit buffer tubes which are placed around a central core strength member. Within each subunit buffer tube, buffer coated fibers are placed around a strength member. A binder that contains a water-blocking compound encloses all of the subunit buffer tubes, which is then enclosed by an outer strength member usually composed of aramid yarn. Corrugated steel is used to provide physical protection and acts as an external strength member, placed between an inner MDPE jacket and an outer HDPE jacket.https://youtu.be/yVPMXtgUWF8
So now that you have a general understanding of the different types of fiber optic cable, you can decide which specific devices are appropriate for your particular installation. For example, say you are having a fiber optic system installed to be run for more than 375 feet through a warehouse. This length is too long for a copper wire cable system to carry data, but multi-mode fiber can handle it easily. An indoor plant installation would be suitable for this situation, since the cable is being run indoors with no environmental variables to worry about. In order to interface your new fiber optic system with an existing Ethernet system, you will either need to use a dedicated switch or media converter, or a switch with GBIC (gigabit interface converter) modules. This will convert electric signals to optical signals, and vice versa, allowing the seamless flow of data through both of the cable mediums. Next, it is important to decide which method of protection you are going to use for the fiber optic car cables for battery. The two available options are: running the fiber through an innerduct to house and protect the fiber, or using armored fiber which has built in protection. Both are good methods of protection.
Pre-Installation Checklist: What you need to know
- Installing fiber through innerduct, or is armored fiber a better way to go?
- How far is the fiber cable being run; multi-mode or single-mode?
- Which method of converting the two cable systems will be used so they may communicate?
- Is this an indoor installation, outdoor installation, or both?
With any investment, it is important to know that you are getting the best value for your money. Low system cost, combined with a longer life expectancy than copper cabling makes fiber optic 4 gauge battery wire the best value hands down when it comes to structured cabling. Fiber optic cabling offers a structured cabling system that is designed to accommodate future applications and technological advancements, making fiber optic cabling the "cabling of the future". If you plan on installing a data cabling system that you want to last as long as possible and have unmatched performance, fiber optic cabling is the way to go. California has seen a rapid increase in businesses opting for fiber optic cabling over copper wire cabling. This has proven to be especially true in San Diego fiber optic cabling installations. For more information on the increase in fiber optic cabling in San Diego, there are multiple resources accessible online.
http://www.centralplaincable.com/html/en/products/weldingcable/363.html