plywood of successive

  • To the plywood of ply 28 Mm, each average ply deviation of Zhang Ban (the position that veneer jackknife manages is included) it is 0.15 Mm of 28 Mm �� . The manufacturing cost of machine of 3.7 much lamination and successive press It is with the plywood of ply 12 Mm quite exemple, compare the manufacturing cost of much composite decking around pools lamination machine and successive press, see a table 2. 3.8 plywood / veneer layer accumulates material the technical parameter plywood of successive press product line / veneer layer accumulates material the technology of successive press product line refers to a watch 3.

    Remarks: Public errand of among them form semifinished product, it is to point to the public errand that runs way along product line. Should be 4 �� line when, it is the public errand of anti-fungus wood laminate floor direction of length of veneer pointing to an edge; Should be 8 �� line when, it is the public errand of direction of width of veneer pointing to an edge.

    The requirement of quality of 3.9 pairs of veneer to make plywood / veneer layer accumulates material product line to be able to achieve the biggest productivity, need to offer the custom made composite decking playsets premise condition that produces high grade board, enter all veneer on glassware to the veneer of product line to feed, requirement veneer quality has the following look dimension parameter: 20 Mm of �� of veneer width 1 280 Mm; �� 2 Mm of veneer length 2 600;